Progress PBD34101B Manual de usuario descargar pdf (Pagina 27)

Problem Possible cause Remedy

The water in the cavity em‐

bossment does not boil.

The temperature is too low. Set the temperature at least

to 110 °C.

Refer to "Hints and tips"

chapter.

The water comes out of the

cavity embossment.

There is too much water in

the cavity embossment.

Deactivate the oven and

make sure that the appli‐

ance is cold. Wipe the water

with a cloth or sponge. Add

the correct amount of water

to the cavity embossment.

Refer to the specific proce‐

dure.

The display shows "12.00". There was a power cut. Reset the clock.

Service data

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the oven cavity. Do

not remove the rating plate from the oven

cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

INSTALLATION

WARNING! Refer to Safety

chapters.

Progress 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Progress PBD34101B Manual de usuario Pagina 27